Request A Quote

Products

NSP-BLDC2205 AC Input BLDC Motor Drive, AC 220V, DC 310V, 10A，Fast Response Performance

  • Power supply: AC 90V to 260V
  • Rated current: ≤ 10A (Depending on the matched motor and rated load).
  • Rated power: Up to 1500W (Do not use with motors exceeding the drive’s power rating).
  • Insulation resistance: >500 MΩ at room temperature.
  • Communication Port: RS485
  • Dielectric strength: 0.5 KV for 1 minute under normal temperature and pressure.
  • Equipped with signal input terminals including EN (Start/Stop), DIR (Direction), and Brake (Electromagnetic Brake).
  • Protections include overcurrent, overvoltage, undervoltage, and motor stall.
Inquiry

Product Overview

The NSP-BLDC2205 simplifies system design by integrating a wide-range AC/DC power supply into a robust brushless DC motor drive. Simply connect it to 90V-260V AC mains—eliminating the need for an external power supply. This all-in-one solution reduces component count, wiring, and panel space while offering global voltage compatibility. It is designed to drive brushless DC motors with power ratings up to 1500W, providing a compact and reliable solution for industrial equipment.

Key Features

  • Dual closed-loop design for current and speed, featuring high torque at low speeds and smooth operation.
  • High torque and high speed output, with a maximum speed of up to 10000rpm/min.
  • Speed control method: 0–5V analog speed regulation.
  • Equipped with signal input terminals including EN (Start/Stop), DIR (Direction), and Brake (Electromagnetic Brake).
  • Can output speed signal, fault signal, etc.
  • Protections include overcurrent, overvoltage, undervoltage, and motor stall.

Function Overview

  1. Hall Sensor-based Open-Loop Speed Control
  2. Hall Sensor-based Closed-Loop Speed Control
  3. Hall Sensorless Open-Loop Speed Control
  4. Hall Sensorless Closed-Loop Speed Control

Environmental Parameters

Parameter Specification
Cooling Method Natural air cooling (Forced air cooling is recommended)
 Environment Application Avoid dust, oil mist and corrosive gases
Temperature 0℃～+50℃
Humidity <80%RH, non-condensing, no frost
Vibration ﹤0.5G（4.9 m/s²）10Hz-60Hz (non-continuous operation)
Storage Temperature -20℃～+65℃
Dimensions 178 × 108 × 68 mm
Weight 887.7g

Wiring Diagram

Brushless Driver Function Parameter Table
Function Brushless Drive Model
Basic Series Standard Series Enhanced Series UL Certified Enhanced Series
Hardware Parameters NSP BLDC-4805 BLDC-4810 BLDC-4820 BLDC-4830 BLDC-2205 BLDC-4810A BLDC-4820A BLDC-4830A BLDC-2205A BLDC-2210A FOC-4810AS FOC- 4820AS FOC-4830AS FOC-2205AS FOC-2210AS BLDC-4810B BLDC-4820B BLDC-4830B BLDC-2205B BLDC-2210B BLDC-2215B
Input Voltage DC18-60V ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
AC90-265V ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Input Current DC1-5A ✔
DC-10A ✔ ✔ ✔ ✔
DC-20A ✔ ✔ ✔ ✔
DC-30A ✔ ✔ ✔ ✔
AC-05A ✔ ✔ ✔ ✔
AC-10A ✔ ✔ ✔
AC-15A ✔
Output Speed 5-10000 rpm ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Hardware Functions Potentiometer Input 0-5V ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
0-10V ✔ ✔ ✔ ✔ ✔ ✔
Enable Input Active Low ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Direction Input Active Low ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Pulse Input Duty Cycle Input ✔ ✔ ✔ ✔ ✔ ✔
Square Wave Input ✔ ✔ ✔ ✔ ✔ ✔
ABS Brake Active Low ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Speed Output Pulse Waveform ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Fault Output Active High ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Communication Interface TTL Interface ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
RS232 Interface ✔ ✔ ✔ ✔ ✔ ✔
RS485 Interface ✔ ✔ ✔ ✔ ✔ ✔
CAN Interface ✔ ✔ ✔ ✔ ✔ ✔
Termination Resistor ✔ ✔ ✔ ✔ ✔ ✔
Handheld Speed Controller ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Host Computer Speed Control ✔ ✔
Software Functions Square Wave Mode Square Wave Hall-based ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Square Wave Hall Sensorless ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Square Wave Open-Loop ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Square Wave Closed-Loop ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Sine Wave Mode Sine Wave Hall-based ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Sine Wave Hall Sensorless ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Sine Wave Open-Loop ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Sine Wave Closed-Loop ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Certification CE Europe ✔ ✔ ✔ ✔ ✔ ✔
UL USA ✔ ✔ ✔ ✔ ✔ ✔

Unit:mm

NSP-BLDC2205 User Manual-V1.0
Download
Download
Download
Download
Download

Changzhou ZGC Mechanical & Electrical Co., Ltd. is committed to being your trusted partner by delivering cost-effective standard and customized solutions. Headquartered in China’s Motor City, Changzhou.

Follow Us On:

Youtube

Facebook

Instagram

LinkedIn

Twitter

Quick Links

Products

Contact Us

©2025 ZGC. All Rights Reserved.

Get In Touch

Email